Welcome to Qingdao Dashang Metal Co.,Ltd!
Grade：DX51D+ZE
Size：T:1.0mm W:600-1600mm L:2000-6000mm
Zinc Coating : 100g/㎡
Surface: Anti-finger
Technique: Cold rolled
Galvanized steel is defined as a carbon steel sheet coated with zinc on both sides. There are two main processes used to produce galvanized steel: continuous hot dipping and electro-galvanizing.
The hot dipping process consists of passing the steel through a bath of molten zinc, while the electro-galvanizing process consists of the application of zinc through electrolytic disposition. The result is a layer of zinc tightly adhering to the base metal through an iron-zinc bonding layer. A zinc coating is one of the most effective and economical methods of protecting bare steel from a corroding environment. The zinc not only serves as a barrier between the steel and the environment, but it will also sacrifice itself to protect the underlying steel sheet. Sacrificial or galvanic protection occurs when two dissimilar metals are in contact and coupled with water and oxygen. Zinc corrodes preferentially to the iron in steel. This protection prevents corrosion of the steel at areas not covered with zinc. Thus, the spread of corrosion from cut edges, drill holes, etc. is minimized.Galvanized Steel Sheet & Coil Material Types
Excellent anti-corrosion, paintability, and processability due to the self-sacrificing characterisiticof zinc.
Available to select and produce the desired amount of zinc gilded and in particula enables thick zinc layers(maximum 120g/m2).
Classified as either zero spangle or extra smooth depending on wheteher the sheet undergoes skin pass treatment.
Commercial Steel (CS Types A, B, and C)
Forming Steel (FS Types A and B)
Deep Drawing Steel (DDS Types A and C)
Extra Deep Drawing Steel (EDDS)
Structural Steel (SS) – further designated by Grades (33,37,40,50,80)
High Strength Low Alloy Steel (HSLAS)
Typical Galvanized Steel Sheets & Coil Applications:
Exterior building products
Ductwork
HVAC products
Flashing
Electrical boxes and other electrical products
Roofing
Doors
Sashes
Automotive parts
Appliances
Commercial and residential steel framing
Parking lots
Truss plates
Metal building purlins
Any other products requiring a corrosion resistant material
| Model NO | Electro Galvanzed steel coil,sheet |
| Grade | SECC,DC51D,SGHC,DX51D,etc |
| Payment Terms | L/C T/T |
| Technique： | Cold Rolled |
| Edge: | Mill / Slit Edge |
| Payment Term: | FOB/CIF/CFR/EXW |
| Thickness: | 0.20-3.00mm |
| Width: | 800-1600mm |
| Quantity: | as Request |
| Transport Package: | Seaworthy Packing |
| Standard: | ASTM,AISI,JIS DIN,GB,EN |
| Surface Treatment: | Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass |
| Stock: | Stock |
| Delivery Time: | 10-25days |
| Application | Machine manufacturing，Building construction automobile |
| Zinc Coating | 30-275g/m2 |
| Spangle | Zero, Small, Regular, Minimized |
| Port | Qingdao China |
| Availability | 10000tons/year |
